Introduction
Hanging a decorative flag is a perfect way for dressing up your house. When hanging a flag, you should always consider the appropriate location and whether it is installed in the right way. If you are wondering how to hang flag with grommets, don’t miss out on this post. We will go through information related to this topic. Let’s take your time and have a look!
Heading 2: What Is A Grommet?
Grommets are small metal rings that reinforce holes in the fabric not to tear when a cable or rope goes through it. Also called eyelets, you’ll often see grommets used in flags, banners, shower curtains, even in shoes for shoelaces! The grommet kits come with the two pieces that make up a single grommet – essentially a male and a female piece – and the tools used for installing them in your fabric – a setter and an anvil.
Heading 2: How To Install A Grommet
If you are looking for unique decorative flags at online stores or websites. In that case, Blog Flagwix is a reputable website you can rely on. There are many helpful posts helping you get a deep understanding of decorative items and various kinds of flags for you to choose from when you visit the website.
If you purchased decorative flags or banners that didn’t come with grommets already installed, you might want to add them yourself before hanging them. Don’t worry! You can purchase grommet kits at most hardware or craft stores, and installing them is easy.
After buying the kits, to install the grommets in your house flags or garden flags, first determine the grommet’s position. Consider how far from the edge of the cloth they’ll need to be, how many you’ll need, and how far apart from each other the grommets should be placed for full support. Once positioned, you’ll trace the inside circle of the grommet onto the fabric using a pencil. Then, cut it with a knife or scissors. Push the male portion of the grommet to the hole in your fabric made by the cut, then place the female or washer portion of the grommet over the top. Now, using the setter and anvil that come in your grommet kit to sandwich the grommet and washer, use a hammer or mallet to hit the two hardware pieces together.
Heading 2: How To Hang Flag With Grommets
How you go about hanging a flag using grommets will vary depending on what you’re using to hang the flag and where you’d like it to hang. Hanging a banner on the front of a building will be very different from hanging a decorative flag on a pole! Flagpoles themselves also vary widely by style, with smaller poles for residential uses and much larger poles for schools and other public facilities. The style of flagpole may affect how you choose to hang a flag on it. For example, some flagpoles only have rope for hoisting up your flag; others come with special clips or hooks. If your flag pole doesn’t come with hooks or a rope, you can always thread zip ties through your flag’s grommets and around the pole to hold the flag in place.
We recommend using snap hooks like the one seen to the left in most flag-hanging scenarios involving grommets. This is because the hooks are straightforward to clip right onto your grommets. Then, all you have to do is attach the loop end of the clip to your flagpole using rope, hook & loop touch fasteners, or zip ties!
Heading 3: Location And Mounting
Choose an area for the flag to hang on the interior or exterior of the building. Make sure the area nearby is transparent so that the flag will not tear. Hanging the flag in a method that causes tearing is a flag code violation—Mount the stand for the flag to the wall or into the ground. If the stand is a pole, you must also connect the rope to it at this time. Locate the two holes that have a ring of metal fastened into them. These are the grommets.
Heading 3: Hanging A Flag On A Free-Standing Pole
Measure the length between the grommets and make note of it.
Make a small loop in the rope and push the loop through the eye of the snap hook.
Pass the loop over the head of the snap hook and pull it taut.
Measure down the rope from the snap hook, the same distance as the grommet measurement you took. This is where you will connect the second snap hook. Connect the other snap hook to the rope the same way as the first.
Connect the two snap hooks to the two grommets on the flag. Pull the rope until the flag is raised.
Heading 3: Hanging A Flag From A Pole Connected To The Wall
Step 1: Hold the flag lengthwise with the pole and pass a cable tie through the grommet. Pull the cable tie tight to secure it to consider the pole. Repeat for the other grommet and the hanging will be complete. If you will be using mounting screws, skip this step.
Step 2:Unscrew the screw from the mounting rings and slide the rings onto the pole. The rings will need to be a distance apart that is equal to the distance between the grommets on the flag.
Step 3: Hold the flag lengthwise with the pole so that the grommets match up to the mounting rings.
Step 4: Pass the screw through the grommet and thread it into the mounting ring. Repeat for the other grommet and mounting ring.
Conclusion
Hopefully, the information we share above is practical for you. Now, when you know how to hang flag with grommets, it’s time for you to display your fantastic decorative flags indoors and outdoors to brighten up your house during holidays or even on a daily basis.
Click on f95zone for more interesting articles
