Perhaps every house has at least a small skein of tape. From time to time we use it as an alternative to glue, we pack gifts. If these are episodic moments, just finding the edge of the tape is not so difficult. If you have to use duct tape all the time due to your occupation, it makes sense to think about purchasing an adhesive tape dispenser.
Why do I need a scotch dispenser and what does it look like?
The design of this convenient device will depend on the frequency and method of its use. If we are talking about a dispenser for packing tape, then it can be either a model in the form of a pistol or in the form of a stationary structure.
As a rule, a gun for scotch tape is charged with a narrow tape, and a desktop dispenser for scotch tape is wider. But this does not mean that there are no special fixed models for thin tape.
Usually, desktop models are used by masters of gift packaging, it is more convenient to work with a manual model in warehouses.
There is also a dispenser for double-sided tape. You can safely charge any double-sided adhesive tape on both fabric and paper or polypropylene bases.
The case itself is made of both plastic and metal. Both models will be equipped with a plastic handle, but metal pistols are considered to be more reliable and durable. Before using the packing tape dispenser, let’s look inside and get acquainted with its components.
How to use the scotch dispenser?
By itself, the instructions of the scotch dispenser are incredibly simple. First of all, we choose the right model: the width of the tape and the dispenser itself must necessarily match.
And then the device will do everything by itself, as soon as you press it to the surface. You gently stretch the tape along the fixation line and slightly at an angle, as if you cut it off with light pressure.
It is important to hold the gun correctly and press at an angle. So, how to fill the scotch dispenser step by step is described below:
- We install a roll of tape into the coil of the gun.
- Unwinding quite a bit of tape.
- Next, you need to slightly push the plastic pressure plate and direct the tape under the rubber pressure roller.
- We keep the pressure plate pushed back and begin to stretch the tape to the holder, then release the plate.
- You can get to work.
The instructions are about the same for many models of the scotch dispenser. As a result, you get several trumps to work with at once.
Firstly: you do not waste time on the very search for the edge of the tape and save a lot of time. You do not have to cut off extra pieces of tape to attach it to the edge of the table and do not constantly look for the cut line.
Of course: for occasional use, it is absolutely not essential, but regular users will appreciate it.
Let’s not forget about neat cuts, a smooth bonding line, and clean work in general. Models of such a device can be different from the simplest desktop, to more complex manual ones.
On desktop: Everything is primitive: you just install the reel in its place and manually unwind a piece. Next, attach it to a cutting knife with teeth.
In manual versions: you will have to adjust a little, but the essence of the work remains the same. One way or another, and with constant work with adhesive tape, the gun will save you time for sure.
A scotch tape dispenser is a tool that allows you to save: An adhesive tape dispenser is a manual device used for convenient and quick packaging of goods or products using adhesive tape.
This tool has a low cost, which makes it the most economical tool for packaging products. With the help of a dispenser, you can reduce time and material costs, thereby increasing labor productivity.
There are two types of scotch dispensers:
- Metal (more durable,
- Usually supplemented with a plastic handle) Plastic
Scotch tape dispenser – instructions for use:
- First, you need to fill the dispenser with scotch tape:
- Drag the adhesive side down around the drum
- Bend up, tear off the end on the comb
After these manipulations, the tape should stick with the non-adhesive side of the drum. Now you can use our tool. To do this, slap the drum with tape on the box.
When the tape is glued, we pull, at the end, we tilt the comb onto the film, tear it off. Done! Now you can see that it is not difficult to understand how to use the scotch dispenser.
How to fill the scotch in the dispenser: The scotch dispenser is a convenient thing for packing a large number of goods. For packing boxes, they provide a maximum pressure of the self-adhesive film to the cardboard.
Considering that the adhesive on the tape is pressure-sensitive, the harder you press the tape to the cardboard, the higher the adhesion will be.
Often we observe that the boxes of stretch films are torn during transportation, which is due to the fact that there is a loose pressing, and at intermediate points, the tape comes off the cardboard and the rolls fall out of the box.
Conclusion: We will try for you best tips to use packing tape dispenser. If you read our article properly, we think you will properly use your product.
